Any use of this information falls under the rules of our
disclaimer.
Processing/Physical Characteristics | 값 | 단위 | 시험규격 |
ISO 데이터 |
용융 부피 - 흐름 속도, MVR |
1.5 |
cm³/10min |
ISO 1133 |
온도 |
200 |
°C |
- |
하중 |
5 |
kg |
- |
기계적 특성 | 값 | 단위 | 시험규격 |
ISO 데이터 |
인장탄성률 |
3300 |
MPa |
ISO 527 |
항복강도 |
59 |
MPa |
ISO 527 |
파단시 신율 |
3 |
% |
ISO 527 |
굴곡 계수, 23°C |
2280 |
MPa |
ISO 178 |
굴곡 강도 |
160 |
MPa |
ISO 178 |
탄성변형률, 1h |
3300 |
MPa |
ISO 899-1 |
탄성변형률, 1000h |
2600 |
MPa |
ISO 899-1 |
Ball indentation hardness |
150 |
MPa |
ISO 2039-1 |
열적 특성 | 값 | 단위 | 시험규격 |
ISO 데이터 |
하중하에서의 변형온도, 1.80 MPa |
86[ann.] |
°C |
ISO 75-1/-2 |
하중하에서의 변형온도, 0.45 MPa |
98[ann.] |
°C |
ISO 75-1/-2 |
비카트 연화 온도, B |
101 |
°C |
ISO 306 |
선형 열팽창 계수, 평행 |
80 |
E-6/K |
ISO 11359-1/-2 |
ASTM 데이터 |
비카트 연화 온도 |
108 |
°C |
ASTM D 1525 |
Other Standards[S] |
열전도율, 솔리드 |
0.17 |
W/(m K) |
DIN 52612-1 |
S: | These properties are reported by the producer according standards that are different to our defaults. | ann.: | annealed |
전기적 특성 | 값 | 단위 | 시험규격 |
ISO 데이터 |
상대 유전율, 100Hz |
2.5 |
- |
IEC 62631-2-1 |
소산 인자, 100Hz |
0.9 |
E-4 |
IEC 62631-2-1 |
소산 인자, 1MHz |
0.5 |
E-4 |
IEC 62631-2-1 |
부피 저항 |
1E16 |
Ohm*m |
IEC 62631-3-1 |
표면 저항 |
1E14 |
Ohm |
IEC 62631-3-2 |
광학 특성 | 값 | 단위 | 시험규격 |
ASTM 데이터 |
탁도 |
2 |
% |
ASTM D 1003 |
광선 투겠淅 |
89 |
% |
ASTM D 1003 |
Other Standards[S] |
굴절 지수 |
1.57 |
- |
ISO 489 |
S: | These properties are reported by the producer according standards that are different to our defaults. |
기타 특성 | 값 | 단위 | 시험규격 |
밀도 |
1040 |
kg/m³ |
ISO 1183 |
테스트 견본 생산 | 값 | 단위 | 시험규격 |
ISO 데이터 |
사출성형: 금형온도 |
40 |
°C |
ISO 294 |
사출성형: 사출속도 |
200 |
mm/s |
ISO 294 |
Processing Recommendation Injection Molding | 값 | 단위 | 시험규격 |
용융수지온도 |
180 - 280 |
°C |
- |
성형온도 |
10 - 60 |
°C |
- |
Processing Recommendation Extrusion | 값 | 단위 | 시험규격 |
Type of extrusion |
sheet |
- |
- |
용융수지온도 |
250 |
°C |
- |
특징
생산 공정
사출 성형, 시트 압출
인도 유형
펠렛 (입자,알갱이)
특별 특성
열안정성
특성
Blending Resin, Foamable
Certifications
Contains renewable resources, Food contact, ISCC Plus
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com